Start here
Watch the whole platform once, then learn it a track at a time.
The full walkthrough below runs 12 minutes 50 seconds on the real workspace, signed in to the demo account. After that, each track on this page pairs the matching chapter with a first session checklist you follow in the demo itself, click for click, and the questions every new customer asks. Everything in the demo is sample data for a fictional company, Sample Operator LLC, so you can press every button safely.
The demo account is [email protected], from the workspace login. Open it in a second tab and follow the checklists as you read.
Lesson tracks
Twelve tracks: set up from scratch, meet the smart tools, then learn the platform in the order it is used.
1. Getting set up from scratch
Start from Scratch is for a business that has nothing ready: no chart of accounts, no system, sometimes not even a vendor list. You answer one guided set of questions about your back office, and OwnerTract builds the starting setup from your answers: your industry pack, a chart of accounts tailored to what you actually buy and sell, your intake address, your approval chain, your cost objects, and a training checklist made for you. Nothing is posted to your books during setup.
Your first session, in the demo
- Step 1, Your business: your business name, your industry, and how the business is set up. The industry picks your pack, your vocabulary, and your chart template. The entity question is asked once, only because the equity section of the chart differs by entity.
- Step 2, How work reaches you: how statements and invoices reach you today (email, paper in the mail, customer or operator portals, or nothing yet) and what you use for the books today. Either way, your workspace gives you one intake email address, so every sender uses the same door.
- Step 3, What you code: pick what you get paid for and your main expense categories from your industry's list, and add anything missing in your own words. Your chart of accounts is built from these picks; what you skip is left out, and you can add accounts later. The keywords on each category seed your starter coding rules.
- Step 4, Your cost objects: list where costs land. Properties or leases for oil and gas, jobs for construction, properties for property management, units for trucking, clients or projects for professional services, departments or locations for a general business. Leaving it empty is fine; you can add them as work starts.
- Step 5, Approvals and your team: who codes day to day, who gives final approval, an optional spending limit for staff releases, and who else needs access. Teammates are saved as draft invites; nothing is emailed until you send an invite yourself. The two step rule holds whatever you answer: whoever codes something is never the one who finally books it.
- Step 6, Vendors, payments, and people: your regular vendors (pick a usual category for each and their invoices arrive pre-coded), the accounts you pay from, and whether you have employees. Payment sources are names only; OwnerTract never asks for bank logins or account numbers. If you have employees, name your payroll provider; payroll itself stays with the provider, and OwnerTract keeps the roster and the pay worksheet.
- Step 7, Opening balances: start from zero, which is a complete answer, or enter what is already sitting in your accounts. Balances are saved as one draft entry that a supervisor posts when you are ready. Nothing posts during setup.
- Finish and download your setup summary. It lists every default setup used and a short list of what is still yours to do. Then work your personalized training checklist, which starts with the modules in the order your business will use them.
Common questions
- I have nothing. No chart, no software, no vendor list. Is that a problem?
- No. That is who this is for. Answer what you know, skip what you do not, and add the rest later. Starting from zero is a complete answer, including for opening balances.
- Does setup form my company or register me for taxes?
- No. OwnerTract sets up your back office only: chart of accounts, document intake, coding, approvals, and the books. Forming the company and registering for taxes happens outside OwnerTract, and setup gives no tax or legal advice.
- Does anything get posted to my books while I answer?
- No. Nothing posts during setup. Opening balances, if you enter them, are saved as one draft entry for a supervisor to post when you are ready.
- Do you need my bank login or account numbers?
- No. Payment sources are names only, the way you talk about them, like Operating account. OwnerTract never asks for or stores bank logins or account numbers, and it never moves money.
- Can the assistant walk me through the questions instead?
- Yes. The assistant in the workspace can collect the same answers in a conversation and generate the same setup, working under your own permissions. The wizard and the assistant use the same question set.
Practice data in the demo: The demo account is already set up, so use it to see what a finished setup looks like: its chart of accounts, its two properties (QUIGLEY 26 and SODA POPINSKI 27), its five vendors, and its approval chain are what the wizard generates for an oil and gas business.
2. Smart tools, in every pack
Every OwnerTract account, in every industry, includes the same smart tools for every product in its pack: the AI assistant, smart coding suggestions, duplicate detection, the anomaly scan, smart reconciliations, the period-end checklist, and plain-language drafting. They are not an oil and gas extra and they are not a higher tier. The tools suggest, flag, and draft; people still approve, and nothing a tool suggests is ever booked on its own.
Your first session, in the demo
- In Coding, open a statement and read the suggested codes before you code anything yourself. Accept what is right; your approvals teach the suggestions your chart.
- In Payables, open the RR-2207 pair in the demo to see duplicate detection already holding an invoice that matches one in the system, so the same bill cannot be paid twice.
- Run the anomaly scan on a period and read what it flags: amounts that break the pattern for that vendor, property, or account. The QUIGLEY 26 variance line in the demo is the same style of flag.
- In Books, open the period-end checklist for the current period and work it top to bottom at your next close.
- Open Reports and run a smart reconciliation: OwnerTract lines up what a statement or a bank feed says against what the books say, and lists the differences for you to clear.
- Ask the assistant a plain question about your own workspace, like what is still unapproved, and use plain-language drafting to turn a set of numbers into a short note you can send.
Common questions
- Do the smart tools cost extra on some plans or industries?
- No. Every pack ships with every smart tool on, for every module in the pack. The only oil and gas only features are the data features themselves: mineral data, Wells, Land, and division orders.
- Can the assistant approve or book its own work?
- No. The assistant works under the signed in user's own permissions, and the approval gates still apply: whoever codes something, human or assistant, is never the one who finally books it. A supervisor gives final approval.
- What does the assistant see?
- Your own workspace: your documents, your chart, your approval queue. Accounts are walled off from each other. The shared learning library behind coding suggestions carries anonymized coding patterns only, and a pattern only activates after at least two accounts code it the same way.
- What if a suggestion is wrong?
- Change it and approve yours. Suggestions never approve themselves, and the bulk approval shortcut only takes lines at 90 percent confidence or better with no variance flag. Your correction is what the system learns from.
Practice data in the demo: In the demo: the QUIGLEY 26 JIB line billed at 2,600 against an expected 2,500 shows the variance style of flag, the RR-2207 pair shows duplicate detection, and the learned suggestion at 95 percent confidence on the Sample Operator LLC statements shows smart coding after it has seen approvals.
3. Statement Coding
Live nowCoding is where the JIB and revenue statements you receive get read, coded, and approved. Statements come in by upload, spreadsheet import, manual entry, or email to your organization intake address, and smart coding suggests a GL account for every line against your own chart of accounts. A person approves every line, a tie out check and a working interest variance check run on every statement, and nothing posts anywhere without the approval chain.
Your first session, in the demo
- Log in to the demo workspace and click Coding in the section nav.
- Open the Sample Operator LLC revenue statement for period 2026-10. Note the printed total, $66,836.26, and that the lines tie to it.
- Run Suggest codes and read the confidence on each suggestion. Learned rules come back at 95 and are marked learned. Keyword matches come back lower.
- Open the sample JIB and find the flagged line: $2,600 billed on $10,000 gross for QUIGLEY 26, against an expected $2,500 at the 25 percent tier, a variance of +$100. The clean $2,500 line beside it carries no flag.
- Try Approve all high-confidence. Only lines at 90 or above with no variance flag are approved. The flagged line still waits for you.
- Release the statement, then note what is still locked: final booking takes a supervisor or an admin, and export stays blocked until every line is approved and the lines tie to the printed total within one cent.
Common questions
- How do statements get into Coding?
- Four ways: upload a PDF, import a CSV or Excel file, type one in by hand, or email it to your organization intake address. A PDF with a readable text layer gets draft lines drawn from it. A scanned document with no text layer starts empty and is flagged for manual entry. There is no OCR, and the flag says so.
- Does the system ever approve a line for me?
- No. Suggestions never approve. The bulk approve button only takes lines at 90 confidence or above with no variance flag, and a person still releases the statement and a supervisor or admin gives final booking.
- Why is my export blocked?
- Export requires every line approved and the line total tied to the printed total within $0.01. Until both are true, the export refuses and tells you which condition is missing.
- What can I export to?
- Quorum, SAP, generic CSV, and native Excel layouts. The presets are starting layouts: you match your own template once, save it, and every later export follows it.
- Where does a coded batch go next?
- Final booking posts the statement to Books. The Send to AP handoff also turns a statement batch into a draft invoice in Payables, once, so the same paper can be checked from the payables side.
Practice data in the demo: Practice on the two Sample Operator LLC statements for period 2026-10: the revenue statement (printed total $66,836.26) and the sample JIB, which carries the QUIGLEY 26 variance line.
Smart tools here: smart coding suggestions on every line (learned rules marked at their confidence, keyword rules below them), the variance check that compares a billed share against your working interest, and the anomaly scan over coded lines. Suggestions never approve; the bulk shortcut only takes lines at 90 percent confidence or better with no variance flag.
In other industries: construction codes cost statements and progress billing statements to jobs and projects; property management codes operating statements and rent and collections statements to properties; trucking codes service revenue statements and cost statements to units; professional services codes client billing statements to projects; a general business codes revenue and cost statements to cost centers. The flow, the approvals, and the smart tools are the same.
4. Payables (Invoice & AP)
Live nowPayables handles the vendor invoices your company owes: intake, coding to a GL account, a property, and an AFE, then a three step approval chain. It carries a vendor master, duplicate invoice detection, aging buckets, and early pay discount windows. OwnerTract never holds vendor bank details and never pays anyone: Paid is a manual mark for a payment you made at your own bank.
Your first session, in the demo
- Click Payables and read the summary strip: open total, the aging buckets (current, 1 to 30, 31 to 60, over 60 days), and the discount savings still in window.
- Open the Basin Water Services invoice. Its terms are 2/10 net 30, and the system shows the discount amount and the deadline while the window is open.
- Open invoice RR-2207 and read the duplicate banner. A second invoice from the same vendor matches its invoice number and amount, and a flagged invoice cannot be submitted, reviewed, or approved until a senior or above acknowledges the flag.
- Code a line on a draft invoice: GL account, property, and AFE. If the line category does not fit the AFE type, the type check flags it with the reason.
- Walk the chain: staff submit, senior review, final approval by a supervisor or an admin. The person who coded the invoice can never be its final approver.
- On a Ready to Pay invoice, open Export (Quorum, SAP, CSV, or Excel). Only Ready to Pay invoices export. After you pay at your own bank, mark it Paid with the date and your own payment reference, the way the seeded Paid invoice carries check 10482.
Common questions
- How do invoices arrive?
- By hand entry, PDF or image upload, email to your organization intake address, or the Send to AP handoff from Coding. Vendors keep emailing invoices the way they do today. There is no network for a vendor to join.
- Does OwnerTract pay my vendors?
- Never. No vendor bank details are stored anywhere in the product. You pay through your own bank and record the payment here with your own reference.
- What stops a duplicate payment?
- Duplicate detection matches the same vendor and invoice number, or the same vendor, amount, and a date within 7 days. A flagged invoice is blocked from the approval chain until a senior or above acknowledges the flag.
- Who can give final approval?
- A supervisor or an admin, and never the person who coded the invoice. Final approval posts the invoice to Books.
- Are discounts automatic?
- No. Discounts are shown with their savings and deadline so you can decide. Taking one is your call at your bank.
Practice data in the demo: Practice on the 5 sample vendors and 9 sample invoices, which cover all five statuses. Look for the RR-2207 duplicate pair from Reeves Roustabout Company and the Basin Water Services invoice with an early pay discount still inside its window.
Smart tools here: duplicate detection runs before an invoice can move, so the same bill cannot be paid twice; the anomaly scan flags amounts that break a vendor's pattern; coding suggestions pre-fill the account on repeat vendors; and plain-language drafting turns an invoice into a short approval note when you need one.
In other industries: the vendors and bills change, the flow does not. A construction account opens with a labeled sample invoice from (Sample) Builders Supply Co, BS-1042 for $4,860.50; property management with (Sample) Ace Maintenance Supply, AMS-2210 for $1,240.75; trucking with (Sample) Fleet Parts Supply, FPS-8814 for $963.20; professional services with (Sample) Office Services Co, OSC-3091 for $412.60; a general business with (Sample) Acme Supply Co, AC-5520 for $689.40.
5. Books (General Ledger)
Live nowBooks is the general ledger at the center of the platform. Booked statements and finally approved payables post balanced journal entries here, and only through those final approval gates. It adds manual journal entries, period open and close locks, and the reports: trial balance, income statement, and a balance sheet summary.
Your first session, in the demo
- Click Books and pick a period. Read the trial balance and how minor accounts roll up into their majors.
- Open the journal entry posted when the sample revenue statement was booked. Each coded line posts to its GL account, and one clearing line (9010 Suspense Clearing, or 9030 JIB Suspense for a JIB) takes the other side, so the entry balances and can be checked by hand.
- Open the income statement and the balance sheet summary for the same period.
- Draft a manual journal entry and balance it to the penny. Posting it takes a supervisor or an admin.
- Close the period, then try to post into it. The posting is refused and the source document is left untouched. Reopen the period the same way, as a supervisor or admin.
Common questions
- What posts to Books on its own?
- Nothing posts on its own. A statement posts when a supervisor or admin gives it final booking in Coding, and an invoice posts at final approval in Payables. Those gates are the only automatic posting paths.
- Is the balance sheet a full balance sheet?
- Not yet, and the product says so. It is a clearing and earnings summary for now, because the seeded chart carries no cash, receivable, payable, or equity accounts yet. Clearing balances clear when payments are recorded against them.
- Can a closed period be changed?
- Postings into a closed period are refused. A supervisor or admin can reopen a period, and the change is written to the audit trail.
- Does Books move money?
- No. Books is records only. OwnerTract prepares entries, registers, and files. Your own bank moves the money.
Practice data in the demo: Practice on the entries posted from the two Sample Operator LLC statements and the approved sample invoices, against the seeded 69 account chart (13 majors and 56 minors).
Smart tools here: the period-end checklist walks the close in order; the anomaly scan reads posted entries for amounts that break pattern; smart reconciliations line the books up against statements and list the differences; and the assistant can draft the journal entry you describe, which still posts only through the supervisor gate.
In other industries: the chart changes, the books do not. Each pack starts from its own chart template: job costs for construction, property operating expenses for property management, unit operating costs for trucking, delivery costs for professional services, cost of goods sold for a general business. The close, the reports, and the gates are identical.
6. Distribution & Outbound JIBs
Live nowDistribution holds the division order deck for each property and runs revenue distribution from booked revenue statements, allocating every owner to the cent. Outbound JIBs bill your working interest partners their share of coded costs for a property and period. OwnerTract generates the payment register and the ACH file. Your bank makes the payments.
Your first session, in the demo
- Click Distribution and open the QUIGLEY 26 owner deck. Check that the deck totals exactly 1.0. A deck that does not total 1.0 cannot calculate, and the system shows a warning instead of quietly fixing a decimal.
- Open the SODA POPINSKI 27 deck to see an operated property at 100 percent working interest.
- Calculate a run for a property and period. Runs read booked revenue statements only, and largest remainder allocation makes every column tie back to the run totals to the cent.
- Find the owners held back: the Harold Finch Estate is in suspense because no signed division order is on file, and owners under the minimum pay amount are held the same way, with the reason shown.
- Walk the run from Calculated to Reviewed to Finalized. The person who calculated the run cannot finalize it. Finalizing posts the net amount to Books.
- From the finalized run, download the payment register (CSV or Excel) and the ACH file for your own bank, and print one owner's statement.
- Switch to Outbound JIBs and open the JIB for the same property and period: partners are billed at their deck decimals, the operator is billed the remainder, and the totals tie to the cent.
Common questions
- Where does a run get its numbers?
- From booked revenue statements for that property and period, and nothing else. If a statement is not booked, it is not in the run.
- How is each owner's share figured?
- Royalty and other burden interests are paid their decimal of the run directly. Working interest owners share what remains after burdens, at their deck decimals.
- Does OwnerTract send the payments?
- No. It generates the register and a NACHA ACH file for your own bank. The seeded ACH header uses a placeholder routing number and a company ID drawn from your organization until you confirm your own bank details.
- Can I redo a run?
- There is one run per property and period for now. Void and reissue is not built yet, so check the deck and the booked statements before you finalize.
- How do ownership transfers work?
- A transfer closes the old owner record and opens a new one, and the history is kept on both records.
Practice data in the demo: Practice on the QUIGLEY 26 and SODA POPINSKI 27 decks and the 2026-10 QUIGLEY 26 run, which distributes a net of $66,836.26. Find the Harold Finch Estate held in suspense, with the reason shown.
Smart tools here: the anomaly scan reads a calculated run before you finalize it, and plain-language drafting turns the run into the short note that goes out with owner statements. The person who calculated a run still cannot finalize it.
In other industries: this module exists in the property management pack as Owner Distributions, where it pays property owners from rent and collections instead of oil and gas revenue. Division order decks are an oil and gas feature; owner distributions work from the property and its owners. The other packs do not include this module.
7. AFE Workflow
Live nowAFE Tracking is the authorization for expenditure register with a full lifecycle: Draft, In Review, Approved, Balloting, Active, Supplemented, and Closed. Every AFE carries one of 10 types, a cost template that seeds its budget, partner balloting with election tracking, and supplements as the only way an approved amount changes. Spend collects approved coded lines plus payables amounts once they post in Books.
Your first session, in the demo
- Click AFE Tracking and read the register: the four sample AFEs in four different states, with authorized against spent.
- Open AFE-2026-003, the one in Balloting. Read the elections: Permian Working Interest Partners (30 percent) elected, Delaware Basin NonOp Group (15 percent) went non-consent, and Sample Family Minerals LP (10 percent) has not responded. The AFE cannot activate while a partner is still silent, and the screen says so.
- Open AFE-2026-004 in its Supplemented state. The base authorization was $150,000 and one approved supplement of $35,000 brings it to $185,000. Its budget lines came from the Plug and Abandon cost template.
- Open AFE-2026-001 (Active) and read the budget versus actual table by GL account, including spend that arrived from Payables once it posted in Books.
- Create a draft AFE from a type template and watch the budget lines seed and sum to the authorized amount.
- Back in Coding, find the line coded to a drilling account on a completion AFE. The type check flags it with the reason, and bulk approval skips it.
Common questions
- What AFE types are there?
- Ten: Drilling, Completion, Drilling and Completion, Workover, Recompletion, Plug and Abandon, Facility, Leasehold, Seismic and Geological, and Other. Each type carries its own cost template.
- How does an approved amount change?
- Only by supplement. A supplement takes a supervisor decision, and the person who requested it cannot decide their own supplement.
- Do ballots go out to partners?
- Balloting is tracked in the workspace, not sent. Elections are recorded here, and no partner emails or letters go out from the product yet.
- Who approves an AFE?
- Staff submit, seniors review, and a supervisor or an admin gives final approval. The creator can never approve their own AFE.
- What happens at closeout?
- Final spend is recorded against the authorization, the variance is shown, and the AFE locks against further coding.
Practice data in the demo: Practice on the four sample AFEs: AFE-2026-001 (Active, Drilling, $1,250,000), AFE-2026-002 (Approved, Completion, $875,000), AFE-2026-003 (Balloting, Drilling and Completion, $1,980,000), and AFE-2026-004 (Supplemented, Plug and Abandon, $185,000).
Smart tools here: the anomaly scan flags budget lines that break the pattern for that project type, and the assistant can draft the supplement or change order summary in plain language for the partners or the customer. Type mismatch lines are flagged automatically and kept out of bulk approval.
In other industries: construction is the other pack with this module, where it is called Projects and supplements are called change orders. A construction account tracks a project budget, its approvals, and its change orders the same way, minus partner balloting: balloting is an oil and gas feature. The other packs do not include this module.
8. Land Admin
Live nowLand Admin is the property master the rest of the platform checks against. Each property records its operator, whether your interest is operated or non-operated, your base working interest and net revenue interest, its JOA, and interest tiers that change your share by phase. This master is what the Coding variance check reads and what the Distribution decks are built from.
Your first session, in the demo
- Click Land and open QUIGLEY 26 (Sample): non-operated, operator Apache Corporation, base working interest 25 percent, under the Sample JOA - Quigley.
- Read its interest tiers: Drilling 25 percent, Pre-Payout 25 percent, Post-Payout 18.75 percent. This table is what the Coding variance check reads when it tests a billed share.
- Open SODA POPINSKI 27 (Sample): operated, 100 percent working interest. That is why its JIB lines, billed at full share, check clean.
- Open the property import and read the decimal rule before you try a file: 0.125 works, 12.5% works, and a bare number over 1 with no percent sign is rejected as ambiguous, never guessed.
- Run an import and read the result: valid rows import even when other rows fail, and every rejected row comes back with its row number and a reason.
Common questions
- Why does the variance check use tiers instead of one interest?
- A JOA can carry a different share by phase. The check uses the tier covering the statement period, and falls back to the base interest when no tier covers it. The basis it used is shown on the flag.
- Can I import my property master from Quorum or SAP?
- Yes. The import is tolerant of column name variations and was built for property master exports. Strict interest discipline still applies to every row.
- What happens to a bad row in my file?
- It is rejected with its row number and a reason. The good rows still import. Nothing is guessed or quietly corrected.
Practice data in the demo: Practice on the two sample properties: QUIGLEY 26 (Sample), non-operated with operator Apache Corporation, and SODA POPINSKI 27 (Sample), operated at 100 percent working interest.
Smart tools here: smart coding reads the working interest tiers when it checks a statement, so a post-payout line is tested against the post-payout interest, and the anomaly scan flags a property whose billed share changes without a tier change behind it.
In other industries: this module is called Jobs in construction, where the records are the jobs costs land on, and Projects in professional services, where the records are client engagements. Property management keeps properties here, with the owner each property reports to. The working interest tiers and JOA fields are oil and gas only.
9. Wells
Live nowWells is the operations file: a lifecycle record for every well with its permit, spud, completion, first production, and plugged dates, its status, and its linked AFE. Daily drilling and completions reports and monthly production history live on the same file, and field costs sit beside the coded statement and payables totals so drift against the AFE shows up between statements.
Your first session, in the demo
- Click Wells and read the list: five sample wells, one in each status from Permitted to Plugged.
- Open a well file and read the lifecycle dates, the status, and the linked property and AFE.
- Read the cost view: field reported daily costs, coded statement and payables totals, and the AFE authorization, side by side.
- Open a producing well and read its monthly production history.
- In your own account, add a daily drilling report to a well and see where the field cost lands: beside the coded totals, never added to them.
Common questions
- Are the demo wells real wells?
- No. The seeded wells are sample data: synthetic dates, depths, and volumes in the shape of public records, and the sample note travels with the well wherever it is shown. They are not Railroad Commission records.
- Does Railroad Commission data flow into the well file automatically?
- Not yet. A well file starts from your property master and AFE register plus what your team keys in. The live RRC join for the well skeleton has not landed, and the product says so.
- Why are field costs not added to the coded totals?
- The same cost can appear in both a field report and a statement. Adding them would double count it. They ride beside each other so the drift between the field and the paper is visible.
Practice data in the demo: Practice on the five sample wells, one in each status: Permitted, Drilling, Completing, Producing, and Plugged. Each record is labeled Sample on the record itself.
Smart tools here: the anomaly scan compares a well's monthly production and field costs against its own history and flags the breaks. The other smart tools work on the costs that flow from Wells into Coding and Books.
Wells is an oil and gas only module. No other pack includes it, and nothing here is renamed or translated for other industries: a construction job or a trucking unit is tracked in its own module, not in Wells.
10. Leads + Data
Live nowLeads is where the OwnerTract data product lands inside the workspace. Each week, new Texas drilling permits are matched to the mineral owners on the tracts being developed, and those owners arrive as a lead pipeline with mailing addresses, the permit and operator behind each lead, appraised values with an estimate range, and a sell signal score. Weekly packages are delivered into the Packages section of the same workspace.
Your first session, in the demo
- Click Leads. The demo opens with the Reeves County sample package: 34 owners as leads, each with the permit, the operator, a mailing address, an appraised value with an estimate range, and a sell signal score.
- Click a lead to open the editor. Move it from New to Letter Sent and add a note. Stage and note changes save to your account right away.
- Work the seven stages in order: New, Letter Sent, Replied, In Conversation, Offer Made, Closed Won, Passed.
- Click Packages to see where weekly deliveries land. The Reeves County sample package that seeds every new account is already there.
Common questions
- Where does the data come from?
- Texas Railroad Commission drilling permits joined to the certified county appraisal roll. The sample package joins Reeves permits to the Reeves CAD 2026 certified mineral roll.
- How fresh is a package?
- Packages are weekly. One honest limit: a brand new unit may not be on the certified roll yet, and unmatched leases are excluded rather than mislabeled.
- What is the sell signal score?
- A records only ranking built from signals like an estate holder, an out of state mailing address, a trust, or an owner appearing in several leases. It is labeled inference to help you sort outreach, not a promise that anyone will sell.
- What does the data cost?
- The Starter Pack is $59.99 one time. The weekly subscription is $250/mo. Owner reports are $29 one time.
Practice data in the demo: Practice on the Reeves County sample package: 34 owners as leads from the week ending Nov 18, 2026, plus the Starter Pack package row in Packages.
Smart tools here: honestly, the lead tracker is a simple pipeline, and the smart tools do their work elsewhere in the workspace. The data packages are built with the same discipline the tools use: every row traces to an official record, and estimated values are labeled estimates.
Leads and Data is an oil and gas only product. The mineral data, the permit feed, and the owner packages exist only in the oil and gas pack; other industries start with their own labeled sample data instead.
11. People
Live nowPeople holds the employee roster and the pay worksheet. The roster covers title, department, hire date, status, and pay type, with pay rates visible only to senior roles and above. The worksheet is preparation only: your team enters the amounts for a pay period and exports the file for your payroll provider, which does the processing, tax calculation, and filing.
Your first session, in the demo
- Click People and read the roster: title, department, hire date, status, and pay type for each employee.
- Check who can see pay rates. Senior accountants, supervisors, and admins see them and can set them. Staff see the roster without the rates.
- Open the sample pay worksheet and check its math by hand: regular pay, overtime, other pay with labels, and deductions with labels add to $18,628.25 gross and $17,488.75 net.
- Start a worksheet for a new period and enter one employee's amounts. Gross, deductions, and net total as you go.
- Mark the worksheet Ready for partner and export it as a spreadsheet or Excel file. That export is the handoff to your payroll provider.
Common questions
- Does OwnerTract run payroll?
- No. Payroll processing, tax calculation, and tax filing stay with your payroll provider, because payroll moves money and carries filing liability. OwnerTract never calculates a tax and never pays anyone.
- What does the worksheet hold?
- Entered amounts only: regular pay, overtime, labeled other pay, and labeled deductions, totaled to gross and net for the period. The export is the handoff file.
- Who can see or change a pay rate?
- Senior accountants, supervisors, and admins. The restriction is enforced by role on the server, not just hidden on the screen.
Practice data in the demo: Practice on the seeded roster and the sample pay worksheet, which totals $18,628.25 gross and $17,488.75 net.
Smart tools here: the period-end checklist includes the pay worksheet step, and the anomaly scan flags a worksheet line that breaks the pattern for that employee. Pay rates stay behind the senior role gate either way.
In other industries: People works the same way everywhere. The roster, the worksheet, and the provider handoff do not change; only the chart accounts the worksheet posts to come from your pack.
12. Team, Packages & Intake
Live nowTeam is where an organization manages its people and controls: members and invites, five roles, the release threshold, the audit trail, and the organization email intake address. Packages is where weekly data deliveries land. Together they are the frame every other module works inside: roles decide who can code, release, and give final booking, and every meaningful action is written to the audit trail.
Your first session, in the demo
- Click Team and read the member list and the five roles: admin, supervisor, senior, staff, and viewer.
- Find the release threshold setting. Above that dollar amount, releasing a statement takes a senior or above. Only an admin can change it.
- Send an invite as an admin and read the Pending invites card. An invite can be revoked, and a revoked or already used invite link stops working, by design.
- Open the audit trail (admins and supervisors can read it) and find the entries for coding, approvals, exports, uploads, and role changes.
- Copy your organization intake address and email a statement PDF to it. It lands in Coding as a draft with the original file stored. A vendor invoice sent to the same address lands in Payables instead.
- Click Packages to see your data deliveries, starting with the Reeves County sample package that seeds every new account.
Common questions
- What can a viewer do?
- Read everything and change nothing. The workspace shows a View only access banner and disables the controls, and the server refuses viewer writes as well.
- Who gives final booking or final approval?
- A supervisor or an admin, and never the person who coded the work. That separation is enforced on every statement, invoice, AFE, and distribution run.
- Is my organization's data shared with other accounts?
- No. Your documents, decimals, and data never cross accounts, and another organization's records are simply not found from your login. Only anonymized coding patterns are shared, and a shared pattern activates only after at least two accounts have coded it the same way.
- What arrives through the intake address?
- Statements land in Coding and vendor invoices land in Payables, each as a draft with the original file stored. A scanned document with no readable text starts empty and is flagged for manual entry. Nothing that arrives by email is ever approved automatically.
Practice data in the demo: Practice in the demo organization, where your demo login is an admin. The demo intake address is [email protected].
Smart tools here: the assistant works under each signed in user's own role, so a viewer asking the assistant gets read only answers, and a staff member cannot talk the assistant past the approval gates. The audit trail records assistant actions the same way it records yours.
In other industries: Team works the same way everywhere, with one addition: the organization settings carry your industry pack. You can change the pack until the first entry is posted; after that it locks, so a vocabulary change can never hide records that are already on the books.
Still stuck
Training lives inside the workspace too.
Every track on this page also sits in the Training section of the workspace, next to the module it teaches, with a button that takes you straight there. If a question is not answered here, write to [email protected] and a person will answer it.